@Edouard_R wrote:
Hi everyone,
I'm building a boat in order to make 3D bathymetric rendering. I'm using :
- Pixhawk
- Mission Planner
- Firmware : ArduRover v3.0.0
- Transmitter : Spektrum DX6i
- Receiver : Spektrum AR7700
- Motor+ESC : 2*T100 Thrusters with ESC from BlueRobotics (http://docs.bluerobotics.com/thrusters/)
I encounter a difficulty when I want to arm my Pixhawk after all calibration. I can't arm with my transmitter. The left stick control Throttle and Yaw, and the right stick control Pitch and Roll. So I try to hold the right stick (steering stick I supposed) on the right but nothing happen.
When I press the arming button on my ground station, my pixhawk is armed (fix blue light) but it still appear DISARMED on GCS.Someone can please help me ?
I try to fix this problem since 3 days. When I load ArduPlane firmware V3.6.0 on my Pixhawk I can arm without any problem (left stick hold in the bottom right-hand corner, throtlle and yaw at minimum).
I suppose it's a firmware problem or configuration problem ?Thank you in advance for your help,
Regards,
Edouard R.
Posts: 5
Participants: 3
